Magnets
Thin yet strong, car magnets can be attached
to flat, smooth magnetic vehicle surfaces for
advertising and growing your business on-
the-go. Affordable, wind-tested and durable
custom car magnets are the perfect choice
for removable signage on personal or
business vehicles.
Car magnets are 100% customizable and
paint-safe so you can design your own
magnet, stick them on a car or truck, peel
them off, and reuse them again and again.
With our world class printers you can rest
assured your magnet will be fade resistant
and will look great on your vehicle.
Our magnets come in sets of 2!
Use on metal, magnetic, and flat, smooth surfaces
Thoroughly clean surface before installing
Will not damage vehicle paint with proper use
Temporary and removable
Works with: cars, trucks, SUVs, vans, fleet
vehicles, etc.
For maximum adhesion and longevity, remove and
clean daily
Installation and care instructions must be followed
closely
Custom Cuts & Shapes
Standard Cut
Your magnet will be cut
as a standard rectangle.
Contour Cut
Your magnet will be cut
to the exact shape of
your design. For
complex designs a Halo
cut may be required.
Halo Cut
Your magnet will be
cut in the general
shape of your design
with a small (¼" - ½")
halo border around the
entire design.
Rounded Corners
Standard cut with
corners rounded at
a .25" radius.
How to Install Your Magnet
Place your magnet on a flat magnetic surface for 24 hours to restore magnetic memory.
After receiving your magnet but before installing it be sure to put the magnet on a flat magnetic surface
such as a refrigerator for 24 hours. We ship all our magnets rolled up to prevent damage during shipment.
Placing them on a magnetic surface will help flatten the magnet for installation while resetting the magnetic
memory. Failing to place your magnet on such a surface will result in poor adherence to the vehicle surface
during installation and subsequent use.
Clean the vehicle surface and magnet before installing it.
We recommend cleaning the exterior of your vehicle and wiping down the back of your magnet with a damp
cloth (a mild detergent and water mix will also work) prior to installing on the vehicle's surface. By cleaning
both the vehicle and magnet and allowing them to air dry you'll prevent any dirt or tiny rocks from
scratching the vehicle's paint and create a solid connection between the magnet and vehicle surface.
Place the magnet on a flat magnetic vehicle surface (no curves, bumps, or molding)
Please note that the installation surface must be completely flat without any bumps, curves, or molding. The
install surface must also be a magnet compatible metal otherwise the magnet will not work. To ensure that
your install is correct make sure the magnet completely adheres to the surface and no air pockets are
underneath the magnet and that all portions of the magnet are flat against the metal surface including the
magnet edges and corners.
Avoid damage to your magnet or vehicle by removing and cleaning both surfaces frequently
Remove your magnet on a frequent basis to quickly clean the application surface as well as the back of the
magnet to increase longevity and the magnetic hold for day to day use of your custom vehicle magnet. The
manufacturer recommendation is that daily removal and cleaning will maximize longevity. In our experience,
regular cleaning is typically sufficient.
Remove magnets during car washes or when not in use.
Remove your magnet before any mechanical car wash or use of a power washer, both of which can
permanently damage your cutom car magnet. Also, we recommend storing the magnet for any extended
periods during which it will not be in use. Store them flat and out of direct sunlight.
Hotlanta Signs
Physical Address: 688 Donald Lee Hollowell, Atlanta, GA 30318
Corporate Mailing Address: 3828 Salem Road, Unit 53, Covington, GA 30016
770-354-7475 Info@hotlantasigns.com